Hitec HS422 Servo
Standard Servo SchematicServo Angle Schematic

Hitec HS422 Servo

R 237.56

2 in stock

SKU: MTR002. Category: . Tags: , , , .

Product Description

The HS-422 has been around for a while and for a good reason, durability and the ability to be easily modified. For inexpensive robotic applications this the perfect servo. It can easily be modified for wheeled applications since the output shaft is supported on the bottom and top with bronze bushings and the potentiometer is indirect drive. The circuit board is also separate from the motor so the potentiometer can be easily accessed. Simply a great servo at a great price.

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.21sec/60° at no load
Operating Speed (6.0V): 0.16sec/60° at no load
Stall Torque (4.8V): 45.82 oz/in. (3.3kg.cm)
Stall Torque (6.0V): 56.93 oz/in. (4.1kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 150mA no load operating
Current Drain (6.0V): 8.8mA/idle and 180mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Oilite Bushing
Gear Type: Nylon
Connector Wire Length: 11.81″ (300mm)
Dimensions: See Schematics
Weight: 1.6oz (45.5g)

Additional Information

Weight 0.080 kg

Shop by Category